Blackberry Unlock Code Instructions

Before you start unlocking please note:

Every phone only has a certain number of unlock attempts you can try before the phone is hard locked. If on first attempt your unlock code does not work, do not keep attempting to unlock, contact us immediately. This service will NOT remove any power on user codes. There is only one type of subsidy unlock code for your phone, once entered your phone can be used with any sim card, and on any GSM network in the world. The unlock code that we send you is the only unlock code that exists for your phone. Once the unlock code is entered your phone will never re-lock even if you upgrade the software or hard reset your phone. When your phone asks for an unlock code it is NOT asking for your personal SIM PIN unlock code. If you choose to enter this instead of the unlock code we supply, your phone will not be unlock.

How to Enter Unlock Code on Blackberry?

***Below are Blackberry instructions that work for most network providers. T-Mobile locked cell phones have to be entered differently and are shown at the end ***

1. Blackberry Z10, Q10, Q5 Unlocking Instructions
2. Blackberry Z30 Unlocking Instructions
3. Blackberry Porcsche Design P9981 Unlocking Instructions
4. Blackberry Storm 9550, 9530, 9500 Unlocking Instructions
5. Verizon Blackberry Storm 9550, 9530, 9500 Unlocking Instructions
6. BlackBerry Torch 9800, Torch 9810, Torch 9850, Torch 9860 Unlocking Instructions
7. BlackBerry Curve 8520, Curve 83XX Unlocking Instructions
8. BlackBerry Bold 9700, 9780, 9000 Unlocking Instructions
9. BlackBerry Bold 9790, 9900, 9930 Unlocking Instructions
10. BlackBerry Bold 9650 Unlocking Instructions
11. Bell BlackBerry Bold 9700, 9000 Unlocking Instructions
12. Telus BlackBerry Bold 9700 Unlocking Instructions
13. Orange BlackBerry Bold 9700 Unlocking Instructions (Quick Method)
14. Orange BlackBerry Bold 9700 Unlocking Instructions (Regular Method)
15. BlackBerry Curve 9370, Curve 9380, Curve 3G 9300 Unlocking Instructions
16. BlackBerry 8800 & 8820 Unlocking Instructions
17. BlackBerry Curve 8300,8310,8320,8520,8900 Unlocking Instructions
18. BlackBerry Curve 8350i Unlocking Instructions
19. BlackBerry 8100, 8120, 8110 Pearl Unlocking Instructions
20. BlackBerry 8700 and 8700c Unlocking Instructions
21. BlackBerry 6xxx, 7xxx i.e. 6230, 7100, 7290 etc. Unlocking Instructions
22. T-Mobile BlackBerry Cell Phones Unlocking Instructions
23. T-Mobile BlackBerry 8100 Cell Phones Unlocking Instructions
24. BlackBerry Curve 9320 & 9220 Unlocking Instructions
25. BlackBerry Curve 9360 & 9350 Unlocking Instructions
26. BlackBerry 5820 Unlocking Instructions
27. BlackBerry Curve 8910 (aka Javelin) Unlocking Instructions
28. BlackBerry Curve 9310 Unlocking Instructions
29. BlackBerry 8100 Vodafone Australia Unlocking Instructions
30. BlackBerry Tour 9630 Unlocking Instructions
31. Any Blackberry Phone with OS 6.0, 7.0 or higher Unlocking Instructions

How to Enter Unlock Codes on BlackBerry Z30?

1) Turn on phone without any sim card.
2) Go to Settings and then Security and privacy and then SIm Card
3) Look for a button labeled "Unlock Network" and press it.
4) Enter the 8 or 16 digit unlock code that you received from us via email and press "OK".
5) Your code will be accepted and Device is now unlocked.
Go To Top

How to Enter Unlock Codes on BlackBerry Z10, Q10, Q5?

1) Insert a not accepted SIM card in your Blackberry and turn it on – (Not accepted simcard is one that's not from the network your phone is locked to)
2) Your Blackberry will ask for the unlock code
3) Enter your Blackberry unlock code and press enter
4) Your Blackberry is now permanently unlocked!
OR
1. Press the settings icon.
2. From the Settings screen select "Security and Privacy".
3. From the "Security and Privacy" screen select "SIM Card".
4. Look for a button labeled "Unlock Network" and press it.
5. Enter the 8 or 16 digit unlock code that you received from us via email and press "OK".
6. Your code will be accepted and Device is now unlocked.
Go To Top

How to Enter Unlock Codes on BlackBerry Porcsche Design P9981?

1) Need a SIM card inserted into the phone
2) Go to Settings Menu, Options, Advanced Options and then SIM Card.
3) Hit the menu button and select show keyboard
4) Type in mepd using the keyboard (nothing will show on screen)
5) Type in mep2 another screen pops up for the code (Hold ALT Button for 2)
6) Enter the code, remember you ONLY have 10 chances to get it right
7) Press the enter key
8) A message will appear saying code accepted
Go To Top

How to Enter Unlock Codes on BlackBerry Storm 9550, 9530, 9500 etc?

1) Need a SIM card inserted into the phone
2) Click on manage connections, select turn all connections off
3) Go to Settings Menu, Options, Advanced Options and then SIM Card.
4) Hit the menu button and select show keyboard
5) Type in mepd using the keyboard (nothing will show on screen)
6) Type in mep2 another screen pops up for the code
7) Enter the code, remember you ONLY have 10 chances to get it right
8) Press the enter key
9) A message will appear saying code accepted
10) Turn device off, insert SIM of your choice if have not done so already
11) Turn the phone back on
12) Go to Options, then Mobile Network, on the third row switch it to GSM/UMTS and you're done.
Issues:
1) If you have issues with the phone not recognizing the network, make sure the radio is on by making sure it is not low on power.
2) Sometimes the phone requires you to do "m e p p d" instead of "m e p d" and if that occurs, you will need to do "m e p p 2" instead of "m e p 2"
3) If you have issues with the network not working after you have finished and the phone isn't low on power, switch from Global to GSM to Verizon a few times (keep on doing) and after 3 times of the process completed, leave it on GSM. Should work now.
Removing "Activation Required" on the screen:
1) On the main screen of the phone, press ##000000
2) For the Mobile Directory Number, put in your phone number in there.
3) After you have done that, press the menu button to save the options and the phone will automatically restart
Go To Top

How to Enter Unlocking Code On Verizon BlackBerry Storm 9550, 9530, 9500 etc?

Tip: Turn the phone sideways so you get the full qwerty keypad
1. Ensure the SIM Card that came pre-installed is inserted
2. Go to 'Manage Connections'
3. Click on 'Turn All Connections Off'
4. Go back to 'Options'
5. Click on 'Advanced Options'
6. Click on 'SIM Card'
7. Type 'MEPD' (letters will not appear on-screen but a menu will pop up)
8. Type 'MEP2' (user will be prompted to enter MEP code)
9. Enter the unlock code (for example '1234567890123456')
10. Reboot device
11. Go to 'Manage Connections'
12. Click on 'Restore Connections'
13. Device is now unlocked
Issues:
1) If you have issues with the phone not recognizing the network, make sure the radio is on by making sure it is not low on power.
2) Sometimes the phone requires you to do "m e p p d" instead of "m e p d" and if that occurs, you will need to do "m e p p 2" instead of "m e p 2"
3) If you have issues with the network not working after you have finished and the phone isn't low on power, switch from Global to GSM to Verizon a few times (keep on doing) and after 3 times of the process completed, leave it on GSM. Should work now.
Removing "Activation Required" on the screen:
1) On the main screen of the phone, press ##000000
2) For the Mobile Directory Number, put in your phone number in there.
3) After you have done that, press the menu button to save the options and the phone will automatically restart
Go To Top

How to Enter Unlocking Code On BlackBerry Torch 9800,Torch 9810,Torch 9850,Torch 9860?

1. Insert any not accepted SIM card in your phone and turn it on.
2. You will be prompted to enter an unlock code(also known as MEP or MEP2 or MEP4 Code)
3. Click Yes
4. Enter the unlock code
5. Phone is now UNLOCKED!
6. Reboot device by pulling out the battery
7. Go to “Manage Connections” and turn "ON" the Mobile Network
OR
1. Ensure a SIM Card is inserted. Then Turn on the cell phone.
2. Turn off all the wireless connections (manage connections - turn all connections off)
3. Go to the Options icon on the device
4. Select Device
5. Select Advanced System Settings (at the bottom of the page)
6. Go to 'Sim Card'
7. Type MEPD (NOTE: You will not see any text appear on the screen while typing MEPD & You might need to type in CAPS)
8. Enter the letters: mep2 (Hold ALT Button for 2)
9. Now it will say enter network mep code
10. Enter the code given you. Confirm it to get "Code Accepted" message
11. Your phone is now unlocked.
12. Reboot the device by pulling out the bateery.
13. Go to "Manage Connections" & Select "Restore Connections"
Go To Top

How to Enter Unlocking Code On BlackBerry Curve 8520,Curve 83XX

Note:NO SIM is needed to unlock the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
1. Power on
2. Go to 'Settings'
3. Go to 'Options'
4. Go to 'Advanced Options'
5. Go to 'Sim Card'
6. HOLD 'ALT' Button and type: mep2 (Please note that you will NOT see what you type on the screen)
7. It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!
Go To Top

How to Enter Unlocking Code On BlackBerry Bold 9700, 9780, 9000

1. Power on With any Sim Card (Can Be an active or inactive SIM CARD)
2. Go to ‘Manage Connections’
3. Click on ‘Turn All Connections Off’
4. Go to 'Settings'
5. Go to 'Options'
6. Go to 'Advanced Options' (If there is no ‘Advanced Options’ then click here)
7. Go to 'Sim Card'
8. HOLD 'ALT' Button and type: mep2 (Please note that you will NOT see what you type on the screen)
    *If You also have mep4 code. Then Type: mep4
9. It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked! Reboot it by pulling out the battery
10. Turn on again Go to ‘Manage Connections’
11. Click on ‘Restore Connections’
Go To Top

How to Enter Unlocking Code On BlackBerry Bold 9790, 9900, 9930

1. Insert a non-accepted SIM card – one that's not from the network your phone is locked to.
2. Select yes when prompted if you want to enter an unlock code(aka MEP Code OR MEP2 Code OR MEP4 Code)
3. Enter your BOLD unlock code.
*Wait about 10-30 seconds and it should connect to the network carrier that the inserted SIM card is from.
(NOTE you may need to switch the phone to GSM MODE if it's not yet set to it. You can do this in the network settings section.)
OR
1. Insert any SIM card and turn off all wireless connections
2. Go to Options -> Device -> Advanced System Settings -> Sim Card
3. Type the letters "mepd" (without the quotes, you will not see anything on the screen when typing)
4. Once you see the Personalization Screen type "mep" then hold ALT key and press "2" (without the quotes and space, you will not see anything on the screen when typing *press ALT button for 2).
5. You should be prompted for the code. If you're not prompted for the code, Press and Hold the ALT key and type MEP2
6. Enter the provided unlock code
7. If you have mep4 code then type: "mep" then hold ALT key press "4". You Should be prompted for the code. Enter the provided Unlock Code
(NOTE you may need to switch the phone to GSM MODE if it's not yet set to it. You can do this in the network settings section.)
Verizon phones only: You might need to remove ‘Activation Required’ on the screen or change the Phone Number to yours by following steps below:
Press Call (Green Button) as you would to place a call
Type on the screen: ##000000
Press the Call Button
You will be prompted to the screen with the phone number, change existing phone number to yours
Press the Menu Button to Save the options and the phone will automatically restart
After restarting, it will be updated
Go To Top

How to Enter Unlocking Code On BlackBerry Bold 9650

Note:You must have a SIM card in your phone to complete these steps ( Can be active or inactive )
1. Go to settings menu => and then Options
2. Select Advanced options => and then Sim card
3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4. Type MEP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEP [ALT] 2)
5. You should be presented with a prompt "Enter Network MEP Code". Type in the unlock code received from http://blackberryimeiunlockcode.net and press in the track wheel / jog dial to confirm
6. Your phone is now unlocked
*Please note that after unlocking your Bold 9650, you will need to do a Battery Pull and then go to Options/Mobile Network and change Network Technology to GSM/UMTS and select 2G.
Go To Top

How to Enter Unlocking Code On Bell BlackBerry Bold 9700, 9000?

Note:You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an Telus Sim card in the phone (can be active or inactive). Make sure the phone is not displaying the low battery warning! and you need 2 codes to unlock this device mep2 & mep4
1. Power on
2. Go to 'Settings'
3. Go to 'Options'
4. Go to 'Advanced Options'
5. Go to 'Sim Card'
6. HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
7. It will ask you for the mep2 code. Enter it and then press trackball to confirm.
8. After getting message 'Code Accepted', HOLD ALT and press the following: mep4 (Please note that you will NOT see what you type on the screen)
9.It will ask you for the mep4 code. Enter it and then press trackball to confirm. You phone is now unlocked!
Go To Top

How to Enter Unlocking Code On Telus BlackBerry Bold 9700?

Note:You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an Telus Sim card in the phone (can be active or inactive). Make sure the phone is not displaying the low battery warning!
1. Power on
2. Go to 'Settings'
3. Go to 'Options'
4. Go to 'Advanced Options'
5. Go to 'Sim Card'
6. HOLD ALT and press: mep4 (Please note that you will NOT see what you type on the screen)
7. It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!
Go To Top

How to Enter Unlocking Code On Orange BlackBerry Bold 9700? Quick Method

(No original Sim card Required)
1. Insert a not allowed SIM card
2. Message, "SIM card not found" would appear on the screen
3. Press on Close button
4. click on OK
5. Click on Yes button
6. The prompt to Enter MEP Code would appear (To Get your unique Orange UK Blackberry 9700 Bold MEP Unlock Code)
7. Enter the 8 or 16 MEP Code (Get)
8. Your phone is now unlocked
Go To Top

How to Enter Unlocking Code On Orange BlackBerry Bold 9700 Regular Method?

1. Insert ANY SIM card (can be active or inactive)
2. Go to 'Settings Menu'
3. Go to 'Options'
4. Go to 'Advanced Options'
5. Go to 'SIM card'
6. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD) (For Blackberry 9700 Bold MEP Unlock Code for Orange UK)
7. Type MEP[Alt + 2] ( M E P, Then oress ALT key, then 2 )
8. You should be presented with a prompt "Enter Network MEP Code". Type in the 16 or 8 digit unlock code
9.Your phone is now unlocked
Go To Top

How to Enter Unlocking Code On BlackBerry Curve 9370 / Curve 9380 /Curve 3G 9300?

1. Turn OFF your BlackBerry & insert a SIM card from a carrier other then the carrier your blackberry is branded with.
2. Turn ON your BlackBerry Curve . You should be asked to enter the unlock code.
3. Type in your unlock code and your Blackberry will be unlocked. after pressing the enter button you should see a "code accepted" massage on the screen..
4. If you dont get the screen asking to enter the unlock code then follow the next step.
5. Go to "Manage Connections" > "Turn All Connections Off" to set all the connections off (WIFI and Radio)
6. Go to "Options" and select "Device"
7. Select "Advanced system settings" and then select "SIM card"
8. Type "MEPD" (The letters will not appear). and a personalzetion screen will appear.
9.Hold thge "ALT" key and type "MEP2". (You should see a screen asking to enter the unlock code)
10.Type your unlock code in there and and press "Enter".
11.You will see a message says "Code accepted", If you get error message - try to use the other code(s) using the same way.
12.Restart your BlackBerry Curve and turn ON the connctions - your BlackBerry Curve 9370 is now unlocked!
Go To Top

How to Enter Unlock Codes on BlackBerry 8800 & 8820?

1. You must have a SIM card in your phone to complete these steps (can be active or inactive) Go to settings menu => and then Options.
2. Select Advanced options => and then Sim card
3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4. Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
5. You should be presented with a prompt "Enter Network MEP Code". Type in the 16 or 8 digit unlock code and press in the track wheel / jog dial to confirm
6. Your phone is now unlocked
Go To Top

How to Enter Unlocking Code On BlackBerry Curve 8300,8310,8320,8520,8900?

You must have a SIM card in your phone to complete these steps, We have found that this procedure works best with an AT&T or Cingular Sim card in the phone (can be active or inactive ). Make sure the phone is not displaying the low battery warning!
1. Power on
2. Go to settings
3. Go to advanced options
4. Go to sim card
5. Type MEPD (You will not see any text appear on the screen while typing)
6. Type MEP, hold ALT and press 2, another screen pops up for the code
7. It will ask you for the unlock code. Enter it and your phone is unlocked!
Go To Top

How to Enter Unlocking Code On BlackBerry Curve 8350i?

1. Scroll to the Airplane Icon (Turn Wireless Off.)
2. Press Select.
3. Wireless Mode will turn off.
Follow these steps for entering unlock code:
1. Go to the "Options" screen
2. Select the "SIM Card" option
3. Hold the ALT Key while typing in MEPE or MEPD or MEPPE or MEPPD ( not case sensitive ) ( you will not see text appear on screen while typing ).
4. Release the ALT key; it should then display a list "SIM, Network, Network Subset, etc..."
5. To select "Network" type ALT-MEPE (since E is the Key that gives 2 when shifted)
6. Release the ALT key, it should then ask for the code
7. Enter the unlock code provided.
Note: In case of difficulties when entering the code please try the alternative instructions below: Alternative Instructions how to enter the unlock code. ***** You must have a SIM card in your phone to complete these steps. We recommend using the SIM card that your phone is currently working with *****
1. Go to settings
2. Go to options
3. Go to advanced options
4. Go to SIM card
5. Hold the ALT Key while typing in MEPE or MEPD or MEPPE or MEPPD ( not case sensitive ) ( you will not see text appear on screen while typing ).
6. Does it say Network active? If so your phone is locked
7. Hold the ALT Key while typing in MEPE (not case sensitive) (you will not see text appear on screen while typing)
8. It will say "Enter Network MEP Code, then you type in the 16 digit unlock code, press in the jog dial to confirm
9. Your phone is now unlocked
Go To Top

How to Enter Unlocking Code On BlackBerry 8100, 8120, 8110 Pearl?

1. Go to Options Menu => Advanced Options
2. In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
3. You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2 (*You won't see any text while you are typing either one of these.)
4. Type in the 16 or 8 digit unlock code and your phone is unlocked!

OR 1. Insert SIM into device
2. Power phone on and Turn off the radio (Turn Wireless Off option) VERY IMPORTANT.
3. Select "Options" THEN SELECT ADVANCED OPTIONS
4. Scroll down and select "SIM Card"
5. Type "MEPD" or "MEPPD" (please note that you will not see what you type on the screen)
6. Type "MEP [ALT BUTTON] "2" or "MEPP [ALT BUTTON] "2" (please note that you will not see what you type on the screen)
7. Enter the Unlock Code
8. Press enter
9. Reboot device. Device is now unlocked.
Go To Top

How to Enter Unlocking Code On BlackBerry 8700 and 8700c?

You must have a SIM card in your phone to complete these steps, We have found that this procedure works best with an AT&T or Cingular Sim card in the phone (can be active or inactive ). Make sure the phone is not displaying the low battery warning!
1. Go to settings
2. Go to options
3. Go to advanced options
4. Go to sim card
5. Type MEPD (not case sensitive) (you will not see text appear on screen while typing)
6. Does it say Network active? if so your phone is locked
7. Hold the ALT Key while typing in MEPE (not case sensitive, and you will not see text appear on screen while typing)
8. It will say "Enter Network MEP Code, Type in the 16 or 8 digit unlock code, press in the jog dial to confirm.
9. Your phone is now unlocked
Go To Top

How to Enter Unlock Codes on BlackBerry 6xxx, 7xxx i.e. 6230, 7100, 7290 etc.?

1. Select Options menu on BB.
2. Now you select SIM CARD menu. To be able to see this you have to type this on the keypad on phone : (TEXT WILL NOT APPEAR ON THE SCREEN until you enter the unlock code)
3. Type 'MEPD' for all models except 7100 in which case in case use 'MEPPD'.
4. Usually you should see "active" NET lock. Now in order to disable this lock type 'MEP2' respectively 'MEPP2' if phone is 7100 and will appear a dialog asking for code. NOTE: You must use the "alt" or "shift" key to enable numbers so example would be: m-e-p-"alt key"-2.
5. Now you should see the place to enter your net unlock code. (if not, you didn't type in mep2 or mepp2 properly)
6. Here you must enter the "NET Unlock Code" that the bb unlocker showed you and hit return.
Go To Top

How to Enter Unlock Codes on T-Mobile BlackBerry Cell Phones?

1. On the Home screen, click the Tools icon. The Options screen appears.
2. In the tools screen, select the Settings icon.
3. Scroll to SIM Card and select it. You should see the phone number and the SIM ID number.
4. Type ‘mepd’ to display the first five levels of SIM locking.
5. T-Mobile uses network locking so the Network should display Active. All other states should display Disabled. Please note: For the Blackberry 7100t you will hit the “P” twice when entering the ‘mepd’ and ‘mep2′ for steps 4 & 5.
6. Type ‘mep2′ to display the dialog box asking for the unlock code (Press the Alt + 2 key to get the number 2)
7. Input the Network Unlock code
8. Press ENTER and reboot handheld.
Go To Top

How to Enter Unlock Codes on T-Mobile BlackBerry 8100 Cell Phones?

(alternative instructions if above instructions do not work)
1. Can be done without a sim card inserted.
2. While on the home screen, click the “blackberry key” on keyboard, then select “options”.
3. Choose “Advanced Options”.
4. Select “Sim Card”
5. There is no area to type these letters, you just type them as instructed. No need to hit keys twice to get a letter either. Type m e p p d to display the first five levels of SIM locking. Most companies use network locking so the Network should display Active. All other states should display Disabled (you will not see text appear on screen while typing)
6. Type m e p p 2 to display the dialog box asking for the unlock code (Press the Alt + 2 key to get the number 2) ( you will not see text appear on screen while typing )
7. Input the SIM Unlock code
8. Press in the trackball in once
Go To Top

How to Enter Unlock Codes on BlackBerry Curve 9320 & 9220?

1. Start the phone on with a Non accepted simcard in the phone
2. Phone will display Sim Unlock Code is Needed to Use the phone proceed?
3. Click yes, and input the 8 or 16 digit Unlock code sent to you
4. Phone is now unlocked
OR
1. Go to options --> device settings --> advanced system settings --> simcard
2. Type MEPD using the keyboard (Nothing will show on screen & You might need to type in CAPS)
3. Type MEP, hold ALT and press 2, another screen pops up for the code
4. Enter the code, remember you ONLY have 10 chances to get it right
5. Press the enter key
6. Your Phone is now Unlocked
Go To Top

How to Enter Unlock Codes on BlackBerry Curve 9360 & 9350?

1. Start the phone on with a Non accepted simcard in the phone
2. Phone will display Sim Unlock Code is Needed to Use the phone proceed?
3. Click yes, and input the 8 or 16 digit Unlock code sent to you
4. Phone is now unlocked
OR
* You must have a SIM card in your phone to complete these steps ( Can be active or inactive )
1. Go to Settings Menu => options --> device settings --> advanced system settings --> simcard
2. Type MEPD using the keyboard (Nothing will show on screen & You might need to type in CAPS)
3. If you have mep2 then Type MEP, hold ALT and press 2, another screen pops up for the code
OR If you have mep4 code then type: "MEP" then hold ALT key press "4". You Should be prompted for the code. Enter the provided Unlock Code
4. Enter the code, remember you ONLY have 10 chances to get it right
5. Press the enter key
6. Your Phone is now Unlocked
Go To Top

How to Enter Unlock Codes on BlackBerry 5820?

1. Make sure all the connections are off (go to Manage Connections > Turn All Connections Off)
2. Go to the "Options" Menu
3. Select "SIM CARD" on the menu and click on it. (if you can find it try to look for it in the "Advanced Options")
4. Type "MEPD" then Type " MEP2". Notice that the it will not appear on the screen. also, when you type numbers make sure to HOLD the "ALT" or "SHIFT" key ( type MEP hold alt/shift and type 2). or hold the "ALT" key and type it all togther.
5. Then you will be asked to enter a code (if you can't see it try step 4 once again) you can try to type MEPPD and MEPP2 instand of MEPD and MEP2
6. Enter the unlocking code for your BlackBerry 5820
7. If the BlackBerry unlocked you will get an "Code Accepted" message
8. Restart your BlackBerry 5820, now your BlackBerry 5820 is Unlocked, you can turn connections back on on use your BlackBerry
Go To Top

How to Enter Unlock Codes on BlackBerry Curve 8910 (aka Javelin)?

1. Go to settings menu => and then Options
2. Select Advanced options => and then Sim card
3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4. Type MEP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEP [ALT] 2)
5. You should be presented with a prompt "Enter Network MEP Code". Type in the unlock code and press in the track wheel / jog dial to confirm
6. Your phone is now unlocked
Go To Top

How to Enter Unlock Codes on BlackBerry Curve 9310?

1. Start the phone on with a Non accepted simcard in the phone
2. Phone will display Sim Unlock Code is Needed to Use the phone proceed?
3. Click yes, and input the 8 or 16 digit Unlock code sent to you
4. Phone is now unlocked
OR
1. Go to options --> device settings --> advanced system settings --> simcard
2. Type MEPD using the keyboard (Nothing will show on screen & You might need to type in CAPS)
3. Type MEP, hold ALT and press 2, another screen pops up for the code
4. Enter the code, remember you ONLY have 10 chances to get it right
5. Press the enter key
6. Your Phone is now Unlocked
Go To Top

How to Enter Unlock Codes on BlackBerry 8100 Vodafone Australia?

* Ensure the phone is charged and then switch the phone on 1. Insert a Non-Vodafone Australia SIM card
2. The phone will then display a message. Usually its “Invalid SIM card”
3. Select “Turn Wireless Off”
4. Select “Settings” Menu , then go to Advanced Options > SIM Card
5. By holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}
6. When prompted with “Enter Network MEP code (255 left)” on the screen, enter the 16-digit network unlock code provided for your phone, then press Enter.
7. Reset the phone by pulling the battery and the handset will be unlocked automatically. This will be confirmed if you can make and receive calls with the Non-Vodafone Australia SIM card.
Go To Top

How to Enter Unlocking Code On BlackBerry Tour 9630

Note:You must have a SIM card in your phone to complete these steps ( Can be active or inactive )
1. Go to settings menu => and then Options
2. Select Advanced options => and then Sim card
3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4. Type MEP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEP [ALT] 2)
5. You should be presented with a prompt "Enter Network MEP Code". Type in the unlock code received from http://blackberryimeiunlockcode.net and press in the track wheel / jog dial to confirm
6. Your phone is now unlocked
*Please note that after unlocking your Tour 9630, you will need to do a Battery Pull and then go to Options/Mobile Network and change Network Technology to GSM/UMTS and select 2G.
Go To Top

How to Unlock Any Blackberry Phone with OS 6.0, 7.0 or higher

1. Start the phone on with a Non accepted simcard in the phone
2. Phone will display Sim Unlock Code is Needed to Use the phone proceed?
3. Click yes, and input the 8 or 16 digit Unlock code sent to you
4. Phone is now unlocked
OR
* You must have a SIM card in your phone to complete these steps ( Can be active or inactive )
1. Go to Settings Menu => options --> device settings --> advanced system settings --> simcard
2. Type MEPD using the keyboard (Nothing will show on screen & You might need to type in CAPS)
3. If you have mep2 then Type MEP, hold ALT and press 2, another screen pops up for the code
OR If you have mep4 code then type: "MEP" then hold ALT key press "4". You Should be prompted for the code. Enter the provided Unlock Code
4. Enter the code, remember you ONLY have 10 chances to get it right
5. Press the enter key
6. Your Phone is now Unlocked
Go To Top